Go
New
Find
Notify
Tools
Reply
  
-star Rating Rate It!  Login/Join 
Posted
I am not happy with my Brisket. It is too tough and I am just wanting some advise from the pro's. I cook for 1/2 the time in foil, and then remove it to finish out of the foil. It cooks for 7-10 hours or until done inside using a temp gague. Any thoughts? Thanks for the help.
 
Posts: 6 | Location: ARKANSAS | Registered: March 13, 2005Reply With QuoteEdit or Delete MessageReport This Post
Zeb
Posted Hide Post
Cook for atleast 12 hours. Check the brisket on the flat. The flat takes longer to become tender---that is why you check it not the ticker part fo doneness. The Danny Gaulden article posted by Tom, should be MOST helpful to you.
Hope this helps!
Zeb
 
Posts: 55 | Location: Up a Hogs A**, Looking for a Ham Sandwich! | Registered: November 14, 2004Reply With QuoteEdit or Delete MessageReport This Post
Smokin Okie Competition Team.
Posted Hide Post
WDUNN.

Since a lot of the pros don't have the smaller CS's, which I'm assuming you do. I move this into the open forum where you'll get more responses. Unless you're cooking on a 150 or larger, which the Pro Section has more of.

As for tough, can you tell us what kind of brisket (size, flat, packer?) you're cooking on, and what temp/ time you cooked it for.

That way we can get a little more specific on help.

General rule of thumb, if it's not tender, you din't cook it long enough. Done right, you don't have to foil either, certainly not in a CS.

Smokin'
 
Posts: 8637 | Location: Oklahoma City, OK, USA | Registered: January 25, 2001Reply With QuoteEdit or Delete MessageReport This Post
Posted Hide Post
if you want some great advice go to www.dannybbq.com he is willing to give fantastic advice,click on brisket and enjoy what you read,he's more than willing to help no matter what your cookin on.Happy cookin to ya
 
Posts: 25 | Location: huntsville alabama | Registered: March 02, 2005Reply With QuoteEdit or Delete MessageReport This Post
Smokin Okie Competition Team.
Posted Hide Post
we've also posted his information in the Recipe Section. Danny is a CS owner also.


Dannys Brisket
 
Posts: 8637 | Location: Oklahoma City, OK, USA | Registered: January 25, 2001Reply With QuoteEdit or Delete MessageReport This Post
Posted Hide Post
Hi.

For some reason the Danny link doesn't work for me. I get a drop down message that states the server cannot be found. My browser possibly?

Kate
 
Posts: 222 | Location: Park Falls, Wisconsin | Registered: March 07, 2005Reply With QuoteEdit or Delete MessageReport This Post
Smmmmoooookin'!
Posted Hide Post
 
Posts: 1868 | Location: Searcy, Arkansas - Gateway to the Ozarks! | Registered: August 11, 2003Reply With QuoteEdit or Delete MessageReport This Post
Posted Hide Post
Alrighty Then!

Thanks Wheelz, that works for me!

Kate
 
Posts: 222 | Location: Park Falls, Wisconsin | Registered: March 07, 2005Reply With QuoteEdit or Delete MessageReport This Post
Smokin Okie Competition Team.
Posted Hide Post
The link in BO's post has a typo in it.

I've also post the link to his info that is in our recipe section.

Personally I vote for Brisket 101 on the Guide page (at the top of this page) but hey, I'm biased. (and wait for the new version with updates)
 
Posts: 8637 | Location: Oklahoma City, OK, USA | Registered: January 25, 2001Reply With QuoteEdit or Delete MessageReport This Post
Tom
Posted Hide Post
To agree with the above,Smokin's 101 will give you the best info,terminology,directions to get you started IMO.

Along with Danny's post,here is another classic about cooking packers.

Now Darcy is a died in the wool logburner ,who also cooks on a CS160.

He is an old OK boy,that shares a lot of good advice-whether you always like it ,or not. Wink

Darcy's Brisket
 
Posts: 6861 | Location: Satellite Beach,fl,usa | Registered: March 02, 2001Reply With QuoteEdit or Delete MessageReport This Post
 Previous Topic | Next Topic powered by eve community  
 


Copyright Cookshack, Inc. 2001 - 2007