Re: Probe calibration

downtownsmokerMember

On my brand new SMO 45, my probe is 15-20 degrees lower than temp from same area with instant read pocket thermometer. Put probe in water just off boil, and measured 192 degrees. Is there an adjustment screw somewhere? May I have connected it wrong?

Thanks

Chris Carstens

(PS, brisket still came out fine!)

6/24/153:36 PM

❤️ 0

Original Post

Replies sorted oldest to newest

maxqMember

Your best bet would be calling Cookshack and speaking to Bill or Tony in customer service.

Good luck.

6/25/156:42 AM

❤️ 0

downtownsmokerMember

quote:
Originally posted by MaxQ:
Your best bet would be calling Cookshack and speaking to Bill or Tony in customer service.

Called them and they're sending me a new one! Thanks for the tip.

6/27/152:21 AM

❤️ 0

maxqMember

Cookshack's customer service is 2nd to none.

6/27/156:37 AM

❤️ 0

downtownsmokerMember

End of the story -- Monday, I got my new probe and the problem is solved. Right now, I have two packer briskets in the SMO45, on an overnight cook for a party tonight. CS probe is in one, trusty old Maverick probe thermometer in the other, both in the same spot on the brisket. About 4 degrees apart now at 9 hours into the cook, which is about what I would expect just on differences in the briskets.

THANKS, COOKSHACK. All the rumors about your customer service being the best appear to be TRUE.

7/4/159:16 AM

❤️ 0

sandhMember

Appear?? I'd say yes they are.....

7/4/1510:06 AM

❤️ 0

downtownsmokerMember