Skip to main content

I’m going to smoke three 8lb butts in my Amerique, Thursday or Friday. Should I place one butt off center a bit on the bottom shelve, and the remaining two on the next shelf up? I’ll have the CS probe in one and a Thermogen probe in one of the others. Plan to set to 250, add 2 oz of apple, 2 oz of hickory.

Rather not open the door until all meat is done, unless the lower butt really gets to 195 before the other two.

My goal is to load in 6 nice size butts, max the capacity of the Q, see how it does, time and temp wise.

Comments and suggestions are welcome.
Original Post

Replies sorted oldest to newest

Sounds like a good plan. If there is any noticeable difference in size, put the bigger butt fat side down on the bottom. I usually put things in the center because I like symmetry, but I don't think it will matter at all.

195* isn't a magic number, so if the bottom but hits 195* and the upper butts are at 190*, I'd save myself a trip and pull them all out. YMMV.

You can pull, wrap, and cooler them as suggested here frequently, but if I don't need them for a few hours(like when they finish at 4am Smiler) I usually just turn the smoker off and let them sit with door closed, or put on hold temp. Even with smoker off, batch I cooked the other day were still at 153* about 5 hours later. Save your foil.

Have fun. Good eats.
I cook the butts at 250 in my 009 and I will spray them with apple juice at 150 deg. I have an air pump bottle which works well. I've tried foiling the butts at that time a few times but have found it doesn't make a difference with the butts. I also spray my baby backs at 3 hours with apple juice and then foil for 2 hours baste then 1/2 hour uncovered then on the grill for 10min with glaze or sauce. I cook everything in aluminum pans with a raised grate with a beer in the bottom of the pan at the intitial start of the cook. Makes foiling easy and I hate to clean. I rarley have to clean the grates or replace the foil on the bottom of the smoker other than every 4 or 5 smokes. I know some people on here will crindge at that but it works for me : ). I've been know to hold the butts at 150deg setting if they finish earlier for a few hours. I usually will kick it up back to 250 about 1/2 hour before pulling them. Will wrap them with foil in a cooler if traveling to a party with the goods.

Add Reply

×
×
×
×
Link copied to your clipboard.
×