Skip to main content

I have a fix I need to cure about cold smoking a couple of items. I mean long duration cold smoking. So being I am a tool and die maker/stupervisor, my designer and I set out to design and fab a couple of cold smokers.
I fired mine up today, works like a champ. Ok, the pictures show a hokey set up but I will customize later, I just wanted to give it a go. You will notice it has air pressure coming in from the bottom. That will change, it needs to be a fish tank pump, I just cannot turn the pressure low enough with the regulator on my pancake compressor. It's either off or just too much. This thing puts out all kinds of smoke, actually too much, I need to also work on that. The smaller air supply should help on that. The first picture is the smoker "C" clamped to my old trusty smoker, the second shows the smoke coming out of the pipe inside the smoker.

Original Post

Replies sorted oldest to newest

Add Reply

×
×
×
×
Link copied to your clipboard.
×