Skip to main content

I thought I would share with you my custom pizza cart I made for my PZ400 pizza oven.  The top alone weighs 150 lbs and is 3/8 inch thick 304 stainless.   I had it water jetted out and had them water jet two push pull handles to be able to roll it easy!

The cart weighs near 300, and I drilled 4 holes in the top to bolt the unit down.  I did away with the legs that came with the machine, and used stainless washers to bring it down a bit.   As well I wanted it bolted to the top so it couldn't slide!  I pretty much tig welded the whole thing together.  It is easy to roll around.  Even with the oven bolted down to the heavy cart!

Attachments

Images (11)
  • IMG_9058
  • 57903566153__9FF53545-02ED-4E7D-9D8F-D1A154E259FE.JPG
  • IMG_8751-2
  • IMG_9036
  • IMG_9039
  • 58102707347__B4AF0751-5E35-4027-BA60-F2C3933E51F4
  • 57782271371__68AEFDE1-2C1B-4DE3-A215-CAE364B2A573
  • IMG_8774
  • 57782753110__E3720A0B-E6C5-434F-9891-1BDC7D111D1B
  • IMG_8493
  • IMG_8755
Last edited by nutrientcobra
Original Post

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×