We recently just bought a FE 120 and we are looking to install in a trailer under a hood. My question is how should I secure it from moving around?
Thanks for any suggestions.
Original Post
Replies sorted oldest to newest
Take the casters off and bolt it to the floor is one way.
I have thought of taking the caster off, the only problem is that I won't be able to acess the burn pot chamber. Thanks for your thoughts.
Have you called COOKSHACK? They will help you figure it out. Let us know.
Then you have a challenge. You can't really use straps because you need to get in the door a lot and any kind of bracket you build will have to be used a lot to unhook so you can get to the firepot.
If you're trying to have it so you can move it out, I think you're making it difficult.
Can you place it so you mount it permanently but then have access on the side to the fire pot?
If you're trying to have it so you can move it out, I think you're making it difficult.
Can you place it so you mount it permanently but then have access on the side to the fire pot?
Well, the casters are mounted on 'legs', like a standoff. If you removed only the caster, you should be able to bolt the legs right to the floor ?
You could also get some angle iron, make a square outline that bolts to the floor. Make the frame so the casters sit in each corner of the frame ?
Just a few ideas,
Rick
You could also get some angle iron, make a square outline that bolts to the floor. Make the frame so the casters sit in each corner of the frame ?
Just a few ideas,
Rick
quote:Originally posted by Fozziessmokinbarbq:
I have thought of taking the caster off, the only problem is that I won't be able to acess the burn pot chamber. Thanks for your thoughts.