Reset on fec 100

Remove the panel cover found on the left side of the IQ4 using the 4 tap screws. Using a flashlight look in the opening to the upper right corner. You should see a green (I think it's green) button right around the upper right corner of the panel. Give it a push and you should good to go.

There's was a photo posted of this in the FEC forum sometime back...I'll try to find it for you

For a quicker response, post future FEC questions in the FEC Owners Forum.

Good luck.

HERE'S the pic It's toward the bottom of the discussion.

By the way, I used FIND to locate that. Simply typed in FEC reset and got back a list of matching topics.

quote:

Originally posted by TLTL:
Any body Know?
Thanks
Tom

besure to also check the fire bin to besure it has not filled up once the reset button has tripped. If so take a spoon and remove most of the pellets, besure to turn off power before removeing the pellets. It worked here hope it will work for you also. What caused my problem was i moved the FEC-100 while it was cooking.