1st smoke yesterday with my new CS...8# butt at 250 for 11.5 hours. Wanted to cook to an internal of 205. Readout got to 199 and next reading was "HI". I'm assuming the max readout of the thing is 200...is that correct?

Anyhow, the internal temp at that point was going up at about 9 or 10 degrees per hour so we left in another 30 minutes, opened the door (the 1st time), let it rest and um, um good! This cooker is awsome!

Tom
Original Post
Just to complete this thread I heated up the CS from cold with the probe down the skoke hole. Same thing happened..."199" to "HI".

Called CS the next day & they confirmed that was the way the control was programmed. Seems as though the accuracy falls off above 200 so it is set to read out "HI" at 200 and higher. No big deal, just good to know.

Tom

Add Reply

Likes (0)
×
×
×
×