moving the rotating shelves on 500/750

Former Member

Been fighting with my shelves when I take them in and out of my 500. It's like thewhole rotisserie unit is shifted to the left so I have to put them in at an angle and then fight to get them in the racks.

Brain f@rt.... I suspect the rotating unit can be moved along the main shaft. I just haven't had the time to test this, so I thought I'd ask if anyone has looked at this while cleaning or using their 500/750.

10/15/074:00 PM

❤️ 0

Original Post

Replies sorted oldest to newest

Former Member

for the record, Stuart told me how to do this. That was an ordeal!! I don't have the gumption to post the details at the moment, but here's his overview (I can give helpful details offline)

There are two set screws on the inside of the hubs of the rotisserie arms, it takes a ¼" allen key to loosen them on both. Loosen those screws and light tap the hub with a hammer to release the taper lock. This will free the hub so it can be moved. I think you can do this without getting inside the unit.

10/20/076:36 PM

❤️ 0

Fast Freddie/Love Shack BBQ (Guest)

Mine is the same way.

10/21/077:57 PM

❤️ 0