Skip to main content

2 replies

Controler board question

B bspitmeister 2Member
This may not be the right place to ask this but I was already on this forum. I have one of the early FEC 100 cookers.( no door gasket, no red digital controller) My question is if I want to change over to a control board with the red read out is it just a swap out or is there another temp probe to ad or maybe change the one that is in it now?
Thanks in advance!
Original Post

Replies sorted oldest to newest

FM Former Member
Charles,

You can do it with no problem. All you have to do is unplug the smoker. Take the two screws out of the front control board. Take a small flat head screw driver and unscrew the two little screws on the top rear part of the controller. Remove the little white wires and then unplug the color coded plugs. When you get the new controller just reverse those directions. It is real easy to do and should take you about 10 mins of time. If you need any help give me a call.

Craig
407-221-7161

Add Reply

Post

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×