I have an SM025 that, after turned on and set temp. , display jumps erratically well above and also well below set temp. and does not heat correctly. Setting to fully high temp brings heat up, but display still erratic. Problem developed after cleaning and I suspect I may have damaged oven probe, even after being careful to not molest it. Any suggestions? I'd like to be relatively certain before purchasing something that will not remedy my problem. Thank you in advance.
Replies sorted oldest to newest
You should call CS and let them help you troubleshoot the problem. I think Electrotech monitors this forum and he seems to be very helpful.
Thanks for the advice. I'll do that.
My first thought would be that you have a bad connection on the probe. I would check your connections and if you still have issues or would like assistance trouble shooting the unit give me a call at (800) 423-0698 and ask for Tony.
Dale sounds good just give us a call or email me direct t_marlar@cookshack.com
