THOSE OF YOU WITH YOUR SMOKER BOX SAGGING DOWN ON THE FRONT AND CONTACTING THE FLOOR OF THE COOKER..GETTING GREASY, BURNED ETC. HERE IS THE SOLUTION : IF TONY IN CUSTOMER SERVICE BEND UP ON CANTELEVERED SUPPORT BRACKET DOESN'T WORK THEN DO THIS.
INSTALL A FRONT SUPPORT LEG ONTO THE STAINLESS SMOKER BOX. JUST HAVE SOME ONE DRILL A 3/16" HOLE IN THE MID FRONT OF THE SMOKER BOX ABOUT 3/4 BACK FROM THE FRONT. GET A 1 AND 1/2" LONG PAN HEAD MACHINE SCREW WITH 2 MATCHING HEX NUTS.
PUT ONE NUT ON MACHINE SCREW FIRST, PUSH SCREW THROUGH HOLE IN BOTTOM FRONT OF SMOKER BOX, THEN PUT ON SECOND HEX NUT. THESE TWO HEX NUTS WILL ALLOW YOU TO ADJUST AND LOCK THE SMOKER BOX OFF THE BOTTOM OF THE COOKER FLOOR THUS ELIMINATING BAD GREASE STICKING AND FLOW PROBLEMS AND ENHANCING SMOKE CIRCULATION.
SIMPLE...WHY ISN,T THIS STANDARD ON THE SMOKER BOX..IN SOME WAY..IN THE FIRST PLACE?
Original Post