chimney cap for FEC

Home Depot usually carries 5" flu parts

mchett,
the 5" flue parts i did get at home depot but if there isn't one near you try a sheet metal shop. it is an ez fab item for them and it is no problem to get them to taper it up to the 6" for the rest of the parts
jack

The Home Depot and Lowes in my area only have 4 and 6 inch fittings. I know that a fabrication shop could make one, but I was looking for something off the shelf. This is where I miss work. I had friends there who could make anything. Next time I am down in the big city, I will check with the stores there. They sometimes have parts we don't have locally.

Mike

Go to Lowes and get a 6" cap. It has three small braces coming up from the pipe. I take and drill out the rivets and re-bend them to fit 5" pipe and attach. I have done this several times for friends. I have two FEC 100's on my competition trailer that vent thru the roof but for the one that I use at home I made extended the vent above the unit putting a 5" 90 on the exhaust then installed 28" of 5" pipe with the above mentioned cap. I also had built a stand-off out s/s and mounted it to the existing screw on the smoker to hold the pipe steady. If needed I can take a picture and e mail it to you.
Smoky Mountain Smokers

I got mine at an Ace Hardware. It was difficult to find the parts I needed but most were scrapped from a heat/ac place that sells BGEs! Good friends of mine (still ahd to pay a little though).

Chris
Wildcat BBQ

Cabelas has spark arrestors that fit 4,5,6 inch pipes for outfitters tents. might work fine!
http://www.cabelas.com/cabelas/en/templates/product/standard-item.jsp?_DARGS=/cabelas/en/common/catalog/item-link.jsp_A&_DAV=search&id=0020817513962a&navCount=9&podId=0020817&paren tId=&navAction=push&catalogCode=XF&rid=&parentType=&indexId=cat20118&hasJS=true
Dave / Rhino

Joe I am still waiting on mine....lol


Craig