Mount an FEC for home use but allow it to be moved to sites easily

Well, looks like no one has any ideas but here are mine.

I looked at the site, the only 120 I could find was a trailer with a smoker on it. Is there a 120 that's a trailer only? The link you sent us to was "what to look for in a trailer" but I wanted to check out your exact trailer.

Make sure to check where you locate it. On too small a trailer, you'll want all the weight up front near the axle to allow it to pull. And single axles are fine, but do consider the overall weight and keeping a spare.

Are you wanting to permanently mount it in the trailer, but be able to pull the trailer up home and use it? then think about layout.

do you want to have to step up onto the trailer to get into the FEC or have access from the ground (face the FEC out).

If you don't want to move it at all, and leave on the trailer, you can take the wheels off and mount onto a wood deck of the trailer.

What about trailer layout, that will greatly affect the size of the trailer. Then think about how you want to use it when you go mobile.

Roof? (you can park a small trailer under a 10 x 10 E Z Up

Power? (you'll need a battery b/u and inverter)

Pre table

Wash table

Lots of variables.