Just A little trick that I use to clean my FEC100 racks. I use a large (yard) size trash bag and place the racks inside after knocking off what I can from them with a paper towel. I then spray the bigingus out of them while still inside the bag with EASY-OFF. I then close the bag (fold over on its self) and let it sit for about 24 hours or so. Then I remove the racks from the bag and hose them off. For anything that remains on the racks, a lite scrub with a SOS pad will make them look good as new, In short very little effort involved. Best wishes,
Great tip!
High Desert Q -
I know this is old, old post. However, I am new to the FEC world and like your setup for a stack. I am not sure I need a Vacustack but expect to get diesel elbow. However, I am trying to find a Rain Cap like the one you used. Can you tell me where you found this RAIN cap.
Thanks
I know this is old, old post. However, I am new to the FEC world and like your setup for a stack. I am not sure I need a Vacustack but expect to get diesel elbow. However, I am trying to find a Rain Cap like the one you used. Can you tell me where you found this RAIN cap.
Thanks
High Desert Q
posted July 06, 2011 12:07 PM Hide Post
Russ,
From "Iowa 80" a very large truck stop in Iowa.
Elbow is their item No. 62356....$84.99
Clamp is thear item No. 62281....$17.99
Shipping.........................$16.88
Total...$119.86
to each his own, but it does look great,and thanks again for the help.
Doug
posted July 06, 2011 12:07 PM Hide Post
Russ,
From "Iowa 80" a very large truck stop in Iowa.
Elbow is their item No. 62356....$84.99
Clamp is thear item No. 62281....$17.99
Shipping.........................$16.88
Total...$119.86
to each his own, but it does look great,and thanks again for the help.
Doug
Thanks Morning Flyer for the response.
I have seen that post with the items numbers for the Elbow and Clamp and have found those online. I was actually specifically asking about the ventilation RAIN cap High Desert Q has shown in his picture. Just can't seem to find one that looks quite like it.
I have seen that post with the items numbers for the Elbow and Clamp and have found those online. I was actually specifically asking about the ventilation RAIN cap High Desert Q has shown in his picture. Just can't seem to find one that looks quite like it.
Just wanted to follow up.
I found the Rain Cap that High Desert pictured.
It is a Gas Vent Cap.
Can be found here.
http://www.hardwarestore.com/cap-636081.aspx
Just an FYI
I found the Rain Cap that High Desert pictured.
It is a Gas Vent Cap.
Can be found here.
http://www.hardwarestore.com/cap-636081.aspx
Just an FYI
Warning if anyone reads my previous post with the link to the Gas/Rain cap. I ordered the 5". However, this type B Gas Vent cap has a 5 1/2 in diameter pipe where the diesel elbow has a 5 in diameter. Going to have to mod it some how but not entirely sure how yet. Just wanted to update.
Alright I found a solution to the mistake I made in the post before in this post
http://forum.cookshack.com/eve...=675108573#675108573
Essentially I found an amerivent model 5ecw online and what i really need for the Iowa 80 elbow is an amerivent model 5CW. this one is 5" and fits snuggly inside the elbow.
http://www.rakuten.com/prod/am...t-5in/262796730.html
The picture for this product on their website looks like the 5ecw but the bottom collar is different I promise. I just ordered and received in 2 days. when i mount i will post a picture but it will look just like High Deserts picture in the earlier posts.
http://forum.cookshack.com/eve...=675108573#675108573
Essentially I found an amerivent model 5ecw online and what i really need for the Iowa 80 elbow is an amerivent model 5CW. this one is 5" and fits snuggly inside the elbow.
http://www.rakuten.com/prod/am...t-5in/262796730.html
The picture for this product on their website looks like the 5ecw but the bottom collar is different I promise. I just ordered and received in 2 days. when i mount i will post a picture but it will look just like High Deserts picture in the earlier posts.