Skip to main content

I have my FEC-100 in my toyhauler and have been hauling it off or onto the ramp lately. I was thinking the other day about running the exhaust out the side window in the toy hauler area. It is about 14in tall and 30 some wide crank out style window. I was going to take the screen out and out some plywood in there and use a vent to go through it. Before I do that I wanted to get some feedback on that and see what the consensus was. THanks for your time.
Original Post

Replies sorted oldest to newest

We run with 2 FEC's and they are mounted inside a 23ft trailer. I took and mounted an 8 inch trap door on the back door of the trailer and all we do is open them and push the vent thru them and pin the vents on the exhaust. The doors were bought at a local trailer retailer, they said they were for water outlets in a trailer floor. Inside the trailer we have hung plastic curtains up that divide the trailer in 2 parts the prep area and the cooker area. The curtains are the same we use in the walk-in cooler to help hold the cold air inside.
Sorry I don't have photos, my brother does the pics, and they are all from the wrong angle to show the back of the camper.

www.rvawningsonline.com

It is a care free brand, go to the add a room, then pick the out back room, then click the outback awning. If you want the side walls, then you have to get the out back room to go with the awning.
The awning came will all the hardware including the cables so no jack stands are needed. Just be sure to follow wieght guidlines.

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×